Why Is the Don’t Pass Bet Better than the Pass Bet in Craps?

This question has a simple answer. The don’t pass bet has a lower house advantage than the pass bet. If you’re comparing craps wagers by how likely they are to pay off, don’t pass bets are technically better than pass line bets.

Look at the house edge on various bets in craps. Poke around on that site long enough and you’ll see that the house edge on pass line bets is around 1.41%, while don’t pass bets give the casino a 1.36% edge.

Pass Bet Details
Pass is the fundamental wager in the game of craps. Bettors who place a Pass bet are hoping that the shooter will roll a 7 or 11 on the come out roll. Otherwise, if the shooter rolls a 4, 5, 6, 8, 9, or 10, a point is established and play continues. Once that point is set, pass bettors are hoping that number will appear again before a 7. The worst possible result for pass bettors is a 2, 3, or 12 – when this number appears on the come out roll, everyone who bets with the shooter is a loser.

Don’t Pass Bet Details
Don’t pass bets are the opposite of pass bets. Don’t pass bettors are hoping the shooter rolls a 2, 3, or 12 on the come-out roll. If that doesn’t happen, don’t pass bettors are hoping that a 7 appears before the established point.

Understand that both of these wagers pay even money. Since they pay the same, but one has better odds than the other, you must be thinking: why do people place pass line bets at all?

Three important twists to the way the game is played explain why.

Right vs. Wrong Craps Bets
Spend any time reading up on craps and you’ll come across these phrases – “right bettors” and “wrong bettors.” Understand that don’t pass bets are literally the opposite of pass line bets. Betting on the pass line means betting WITH the shooter, while laying don’t pass bets means betting AGAINST the shooter.

Gamblers who bet with the shooter are called “right” bettors, while those lay wagers against the shooter are called “wrong” bettors. Believe it or not, a lot of people prefer to bet with the shooter (even at a slight disadvantage) than bet on the wrong side.

A don’t pass bet is a bet that the shooter will “seven out” before the point number reappears. Peer pressure and gambling tradition imply that you’d be better off betting with the shooter. It’s a stroke of genius on the part of casinos, because they’re gently pressuring customers to take less-advantageous bets.

“Betting to Lose”
Another reason commonly cited in discussions about pass vs. don’t pass bets – the idea that people don’t like “betting to lose.” What’s that mean?

Imagine the game of craps if everybody switched over to better don’t pass. The dice would be switching hands back and forth – losing would be the same as winning used to be. Wrong bettors are ignoring the appeal of the hot shooter, which is by far one of the most exhilarating things you can see on the casino floor. Once a shooter “gets hot,” customers start increasing their bets, the money starts flowing, and a crowd forms. People who wager on the don’t pass line are cut out of that excitement altogether. If “don’t pass” became the new “pass,” the game itself would change fundamentally.

Low Difference in House Edge
Let’s be honest – the difference in edge between don’t pass and pass is very small. Craps appeals to a certain kind of bettor, one that is not likely to get all that excited about an additional 0.5% advantage. Sports bettors and blackjack players? Absolutely. Craps players? They’re not really known for their ability to slow down and calculate.

The fact that the difference in the casino’s advantage is so low is no doubt another factor in the popularity of the pass line. Let’s say you’re betting $5 per round and seeing 100 outcomes an hour. If you place only pass line bets, your expected losses are around $7 an hour. If you place only don’t pass bets, your expected losses are $6.80 an hour. To most people, betting with the shooter is totally worth that extra $0.20 an hour, just to protect them from the scorn of the rest of the table.

Those are all pretty powerful reasons to avoid don’t pass bets. But the fact remains – most people simply don’t want to bet against the shooter.

And now for a little extra wisdom – there’s nothing at all wrong with betting against the shooter. No casino employee will tell you that you can’t bet the “wrong way.” No dealer will kick you out of the game, and no other players are allowed to do anything to you just because you’re betting against them. What they can do is make your life a bit miserable – give you the cold shoulder, etc.

This is why you’ll often see wrong bettors sitting off to themselves away from the crowd betting with the shooter. All they’re really doing is taking the better bet – the one with the better chances of winning. But the culture of the game is such that a “wrong” bettor is likely to get a little guff from the rest of the table.

Types of Wood Siding Available for Homeowners

When building your home, even the smallest decision could make a world of difference in what it ultimately looks like. This is also true when undertaking an exterior redesign project. Siding, among other key characteristics, is one of those big decisions that could entirely alter your home’s exterior appeal based on your decision.
Although plastic siding has become a popular option in recent years due to pricing, traditional wood siding remains the preference for many homeowners. This is because wood siding offers customers numerous benefits over their plastic counterparts. Benefits include:

• Wood siding is eco-friendlier than plastic

• Wood is more aesthetically appealing

• Many types of wood are naturally resistant to mold, mildew, and rot, which allows the home owner less maintenance

• Wood lasts longer

• …And much more

One of the main benefits is that wood naturally takes to paint, stains, and other decorative options incredibly well. Plastic, on the other hand, often must be crafted in the customer’s color choice – meaning that options are limited. Once decided upon a type of wood siding, however, you can then choose any type of finish. Whether you want to paint your home the colors of the rainbow, or opt for a natural dark wood stain, anything is possible. Below we look at four of the most commonly used types of siding available: board and batten siding, bevel, tongue and groove, and lap siding. Each has their own aesthetic appeal so that there is something for every person’s unique tastes.

Board and Batten Siding

Board and batten siding is a vertical design created by using two different sized boards. The wider boards are set beneath, while the narrower boards are placed atop the joins. These narrower boards are called ‘battens.’ There are no set widths, so homeowners can choose their preference. The most commonly used measurements, however, are 1 inch by 3 inch battens placed over 1 inch by 10 inch boards.

Bevel Siding

Bevel siding is the most commonly used siding. Installed horizontally, boards are cut at an angle so that one side is thicker than the others. This creates a shingle effect, or the appearance that the boards are overlapping one another. Tongue and Groove Siding Tongue and groove siding is incredibly versatile. Available in both rough and smooth board finishes, it is fitted together tightly to give a sleek appearance. It can be installed in any direction, which does not only include horizontal and vertical, but also diagonal.

Lap Siding

Lap Siding is also known as Channel siding. This siding is very versatile, with installation capabilities for any direction (like the above tongue and groove siding). This unique siding features boards which partially overlap one another, and the ultimate results are a rustic appearance like those of a hunting cabin. If you’re interested in learning even more about wood siding -including less commonly used types available – you can contact your local siding specialist or construction expert. They will be able to give you more detailed information, including a price estimate for your area.

10 Strategic Business Advantages of Outsourcing to India

As technology began to evolve, it has made the smaller, more approachable and closer adding to the advantages brought about by the process of globalization. In such development, India has, and will continue to, played a crucial role transforming itself as a strategic market to outsource various IT and ITeS services from across the world. While many large and impressionable corporate entities from across the world has been milking the advantages of India as a strategic outsource partner, there are still a large chunk unconvinced.
If you are one of the companies who are not-so convinced to hire an outsource company from India for your project, the following reasons will sure win you over.

India makes more with less literally possible

As customers are given more choices and competitors continue to up their games, businesses are in a tough spot to improve their efficient and productivity. This can be achieved through outsourcing your requirements to India where you can manage all the outsourced activities and projects with the help of your existing staff, thus effectively improving the output of each of your staff.

India has exceptionally trained professionals with desired skillsets

When you outsource your projects to India, you will mostly be working professional holding technical degrees from eminent universities in India an across the world. As higher education is persistently considered a symbol welfare and social stature, the younger generation strives to become excellent a range of technical niche, which makes is a favourable market for global firms looking for dynamic and enterprising youngsters.

When outsourcing, you can concentrate on your business’s core offerings and competencies

Most of the times, you outsource mundane, repetitive and low-key services to your offshore outsourcing partner. This will ultimately help you get more free time to concentrate on your core service offerings and competencies. You will be made free from tending to your customers’ ordinary queries that any outsourcing company can take care of. This leaves you with the opportunity to improve your service offerings, devise better expansion and growth strategy, work on establishing newer business relationships etc.

India will help you become more scalable than ever

No business experiences the same sort of customer queries and sales all through the year. As the case is, if you have an in-house team attending to the calls, chances are half of the time there will be no sufficient work. During the peak season they might not be able to attend all the queries they get. The former will cost you money the latter will cost you customers and goodwill. However, by outsourcing to India, you can be extremely flexible with your contract. You can reduce the number of employees working as required.

Indian talent pool is well-versed in English

One of the major issues faced by companies outsourcing to foreign countries is the barrier of language, especially when it comes to customer service where interactions between customers and call center executives take over the phone. However, while language and cultural barriers do exist, Indian graduates are more efficient in handling English better than most other non-English speaking counties such as the Philippines, Korea and Egypt.

India offer cheap labour

By the very nature of the country, Indian labour is really cheap when compared to that in the US and other Western countries. It makes sense as the living expense in the US is extremely high in comparison with that of India. As the case is, companies looking to get excellent talent in India will easily find it for cheaper than many companies would offer.

Save on infrastructure costs

Whatever be the sort of industry you operate in, there is a need to update and upgrade your infrastructure from time to time as technology evolves and to meet the challenges of the competition. By the very nature of it, infrastructure investments can cost you dearly for sure. However, when you hire an outsourcing company, they will already have the best and advanced infrastructure need to carry out the operations. If any upgrade is needed, they will do so and you need not worry about the same at all.

You can save on your operation costs with the help of India

When you are hiring the support of an outsourcing company in India, you are paying the fee for the service rendered to you alone. All other operating costs pertaining to the facility, the infrastructure, the labour and all other statutory requirements are borne by the outsourcing company. This will not only help you save a lot of money but also the efforts and time you need to otherwise invest on the same if you were to do it in-house.

Government policies

Indian government sees the IT and ITeS industry as one of the most important and lucrative branches of its economy. As such, it has envisaged several strategies and policies to help the companies improve the value deliverance to their clients. With newer initiatives to meet with prospective clients and investors and for infrastructure development, the government is actively involved with the growth of the IT and ITeS industry of India.

Advantage of time-zone

India is in a strategic position geographically. It helps the outsourcing companies to cater to the requirements of the businesses from the US, UK and Australia without any significant loss of time.